Tester auto Ancel Smoke Generator S3000 S2000 S1000 Detectie scurgere fum turisme si camioane
Description
Acest aparat poate fi utilizat cu ulei pentru bebeluși sau glicerină pentru îngrijirea pielii sau cu glicerină industrială, uleiul de fum selectat trebuie să fie lichid pur, non-apos și în stare fluidă. Nu folosiți ulei de fum vâscos care poate deteriora cu ușurință echipamentul. Folosiți o sticlă gradata atunci când adăugați ulei in aparat. Dacă este supraîncărcat, deschideți evacuarea uleiului pentru a scurge o cantitate corespunzătoare de ulei .
ANCEL S3000 /S2000/S1000 Detector de scurgeri de fum auto in mai multe variante este un instrument profesional de detectare a scurgerilor pe diverse conducte. Va ajuta să detectati rapid și exact scurgerile de mașini, motociclete și camioane pe sistemele de conducte, cum ar fi Testul sistemului de admisie, Testul sistemelor de evacuare, Testul sistemului carterului, Testul de etanșare al mașinii, Testul sistemului rezervorului de combustibil, Testul sistemului turbo, Testul diferitelor fitinguri de țevi. Diferența dintre ANCEL S3000, S2000 și S1000 este dată de presiune si fluxul de fum generat precum si indicatorii aferenti pentru aceste elemente.
The difference between ANCEL S3000, S2000 and S1000 is whether there is a pressure gauge and a flow gauge
Why do you need a smoke leak detector?
》》Because the OBD2 diagnostic instrument only tells you the result and the smoke leak detector tells you the reason.
》》Because 60% of it is related to pressure, air or oil pressure leakage will cause the car to malfunction.
》》Because the smoke leak detector can perform leak detection on the entire pipeline, visualized operation, all-round, no dead ends, and no leaks are missed.
》》Because it is durable and smoke is harmless.
》》Because the pressure gauge and the flow bar can clearly determine the size of the pipeline loopholes and repair them in time.
ANCEL S3000 ADVANCED TECHNOLOGY
▶Crankcase System Test
▶Intake System Test
▶Car Sealing Test
▶Fuel Tank System Test
▶Turbo System Test
▶EVAP System Test
▶Exhaust System Test
▶Various Pipe Fittings Test.
Ancel S3000 pipe smoke leak detector is widely used in cars, motorcycles, trucks, ships, etc.
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles,ATVS,light trucks and speedboats,Suitable for all car models
How to do leakage test?
1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
2. Disconnect the pipe that needs to be connected with detector.
3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
Clear results：Leak status indication
Indenependent switch control design
Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil
SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.
OVERHEAT & ANTI-FROST PROTECTION
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles, ATVS,light trucks and speedboats,Suitable for all car models.
Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
Anti-frost Protection
The device can also work normally at -20℃.
Product detail
Product Package:
1*Car Smoke Leak Detector
1*Carton
1*Intake Bladder
1*Smoke Delivery Hose
1*Adapter Cone
1*Intake Bladder Replacement Rubber
1*Power Cord
1*Funnel
1*Hook up
1*Manual in English
Product details
Similar products
11%
NEW
9%
NEW
22%
NEW
7%
NEW
20%
5%
6%
21%
NEW
7%
NEW
20%