Tester Profesional de ECU Chip Tuning MPPS V21 + Multi Boot + Tricore
Descriere
De regula oferim v18 si nu v21 deorece mai exista inca ajustari de software la ultima versiune.
Noul model de interfata MPPS V18 si V21 este instrumentul profesionist de chip tuning ECU care permite total rescrierea / remap-ul motorului autoturismului dvs exclusiv prin portul de diagnoza OBD2, nu este nevoie de facut lipituri sau de adaugat cabluri de conectare suplimentare, totul se realizeaza simplu, rapid si de înaltă eficiență.
Notice:
1. Please install on Win7 system
2. Please install driver well then open the software, or software can't be opened. Please make sure you use the driver from our CD,
NOT use driver for other MPPS version.
Software V21, Hardware V1.09.03
Acest model are functii avansate pentru calculatoarele Magneti Marelli, acopera o gama larga de calculatoare cum ar fii:
-M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic si multe altele...
MPPS V18
SUPORTA:
Read / Write of Micro, Flash and EEprom fara a avea nevoie de BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
MPPS V18 ARE INCLUS BOOT MODE SUPORT PENTRU CALCULATOARE CU PROCESOARE TRICORE!!!
Auto detectează ECU tip de procesor. Nu este nevoie sa alegeti din listă, totul este automat!
Citire / scriere tuturor memoriilor EEPROM, Irom, Xrom (acolo unde este posibil)
Funcția scriere si citire pe OBD petru ECU cu TPROT (acceptă numai la VAG momentan)
Suport BOOT MODE petru calculatoare cu procesor C167 si ST10
TPROT / DS testeaza daca TPROT este activ, fără a deschide ECU.
Suportă Bosch pana la TP12
Suportă Siemens (curent numai pentru ECU fără protecție prin parolă),
Sprijin pentru deblocarea VAG Simos PCR și Simos 8.
Checksum, corecție acceptată pentru Bosch MEDC17.
Include functie de recovery la multe calculatoare blocate la scriere cu care alte interfete nici macar nu comunica, in multe cazuri functioneaza si atunci cand memoria nici macar nu e programata sau e memorie blank.
The MPPS is a powerful programming tool. It offers general reading/writing operations and checksum support, however it also includes some additional features:
Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools
can not even make communications with.
On certain controllers it even works when with no program is present (a blank memory).
Selectable full / partial reading and writing when the ECU allows this function.
Selectable reading / writing speed.
Writing “changes only” function for faster programming (when supported by the ECU).
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
Boot mode support for ECU’s with C167 and ST10 processors.
EEprom read/write functions for some ECU’s are included.
VAG MEDC17 TPROT level checking without opening the ECU.
Package includes:
1pc x MPPS V21
1pc x Breakout Tricore cable
1pc x CD
1. Please install on Win7 system
2. Please install driver well then open the software, or software can't be opened. Please make sure you use the driver from our CD,
NOT use driver for other MPPS version.
Software V21, Hardware V1.09.03
Acest model are functii avansate pentru calculatoarele Magneti Marelli, acopera o gama larga de calculatoare cum ar fii:
-M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic si multe altele...
MPPS V18
SUPORTA:
Read / Write of Micro, Flash and EEprom fara a avea nevoie de BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
MPPS V18 ARE INCLUS BOOT MODE SUPORT PENTRU CALCULATOARE CU PROCESOARE TRICORE!!!
Auto detectează ECU tip de procesor. Nu este nevoie sa alegeti din listă, totul este automat!
Citire / scriere tuturor memoriilor EEPROM, Irom, Xrom (acolo unde este posibil)
Funcția scriere si citire pe OBD petru ECU cu TPROT (acceptă numai la VAG momentan)
Suport BOOT MODE petru calculatoare cu procesor C167 si ST10
TPROT / DS testeaza daca TPROT este activ, fără a deschide ECU.
Suportă Bosch pana la TP12
Suportă Siemens (curent numai pentru ECU fără protecție prin parolă),
Sprijin pentru deblocarea VAG Simos PCR și Simos 8.
Checksum, corecție acceptată pentru Bosch MEDC17.
Include functie de recovery la multe calculatoare blocate la scriere cu care alte interfete nici macar nu comunica, in multe cazuri functioneaza si atunci cand memoria nici macar nu e programata sau e memorie blank.
The MPPS is a powerful programming tool. It offers general reading/writing operations and checksum support, however it also includes some additional features:
Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools
can not even make communications with.
On certain controllers it even works when with no program is present (a blank memory).
Selectable full / partial reading and writing when the ECU allows this function.
Selectable reading / writing speed.
Writing “changes only” function for faster programming (when supported by the ECU).
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
Boot mode support for ECU’s with C167 and ST10 processors.
EEprom read/write functions for some ECU’s are included.
VAG MEDC17 TPROT level checking without opening the ECU.
Package includes:
1pc x MPPS V21
1pc x Breakout Tricore cable
1pc x CD
ATENTIE: Informatii necesare pentru utilizarea Testerelor/Interfetelor de Chip Tuning !!!
Cumparand aceasta interfata NU inseamna ca si puteti rescrie soft-ul aferent masinii dvs, aveti nevoie de o harta noua de Chiptuning pentru acest lucru ! Ce puteti face cu acest tester este sa copiati harta originala a masinii sau sa o inlocuiti cu una noua, NU si sa o editati.
Contactati-ne pentru a afla costul exact al unui chiptuning pentru modelul dumneavoastra de masina si va putem transmite pe email harta de tuning otimizata individual necesara remapului in vederea cresterii puterii in CP si cuplului in NM precum si pentru reducerea consumului de carburant.
Detalii produs
Produse similare
20%
Tester Profesional de ECU Chip Tuning MPPS V18 + Multi Boot + Tricore, Versiune Profesionala Tuning
Chip Tuning MPPS Pro
MPPS V18.12.3.8 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable,...
499,00 RON
399,00 RON
NOU
12%
Ktag Tester profesional de chip tuning si programare auto Master K-tag HW 7.020 SW 2.23
Chip K TAG ECU 2017
Acest model KTAG MASTER VERSION este de cea mai buna calitate posibila si...
1.099,00 RON
959,00 RON
7%
Tester Profesional de ECU Chip Tuning SMPS MPPS V13.02 ECU Chip Tuning
Chip Tuning MPPS Pro
Noul model de interfata MPPS V13.02 din 2015 este instrumentul...
139,00 RON
129,00 RON
13%
Programator FVDI FLY model 2020 STIC cu 21 Softuri, Set Complet Diagnoza Auto, Programari
FVDI ABRITES F00820
Este unul din cele mai performante pachete de diagnoza auto, modificare...
2.199,00 RON
1.899,00 RON
12%
Interfata Chip Tuning FGTech Galletto 4 OBDII ECU Flasher model V54 A+
Chip Tuning V54 FGTech
Interfata Galletto FGTech Galletto 4 V54 A+ este utilizata...
499,00 RON
439,00 RON
11%
KESS V2 V2.23 Master Pro Tuning Kit Fara Limita de Token-uri Master FW V5.017
Kess V2 Master Tuning
Kess V2 master este una dintre cele mai performante interfete pentru...
999,00 RON
889,00 RON
6%
FVDI Abrites Commander 2018 cu 18 DVD Full Software, Set Complet
FVDI ABRITES F00820
Why to buy this product ? Because you can do it with the device these:...
1.589,00 RON
1.489,00 RON
27%
Tester Profesional de ECU Chip Tuning MPPS V16 plus pentru EDC15 EDC16 EDC17
Chip Tuning MPPS Pro
Noul model de interfata MPPS V16 versiune profesionala este...
329,00 RON
239,00 RON
NOU
8%
Programator Carprog V8.21 Online - citire cod radio Airbag reset, ECU Chip Tunning
Carprog Programari Auto
CARPROG versiunea V8.21 Online citeste 24Cxx si a fost reprogramat la...
799,00 RON
729,00 RON
NOU
16%
Kess Master V2 Versiune Europeana Full Software BEST QUALITY !
Kess V2 Master Tuning
Kess Master V2 este interfata de chip tuning indicata pentru citirea si...
1.199,00 RON
999,00 RON