0760.846.754; 0723.448.645; 0763.920.531; 0756.773.632  |  Intrebari frecvente  |  Contact

Acces cont  |  Inregistrare  |  Istoric comenzi  |  Adm4u  |  A4u19  |  Acces On-Line  |  Suport Tehnic

  
  
  
  
 Poze Tester diagnoza auto BMW ENET 2016 – codari E-SYS 3.27.1 ISTA-D

  • Poze Tester diagnoza auto BMW ENET 2016 – codari E-SYS 3.27.1 ISTA-D
  • Poze Tester diagnoza auto BMW ENET 2016 – codari E-SYS 3.27.1 ISTA-D
  • Poze Tester diagnoza auto BMW ENET 2016 – codari E-SYS 3.27.1 ISTA-D

Tester diagnoza auto BMW ENET 2016 – codari E-SYS 3.27.1 ISTA-D

SKU: BMW ENET 2016

Pret vechi: 199 RON Reducere 30%

Pret nou: 139 RON

Disponibil in stoc

In functie de valoarea comenzii dvs pretul poate include cheltuielile de livrare !

Cablul ENET 2016 este construit special pentru diagnoza si codarea autoturismelor marca BMW, fiind necesar un transfer mare de date.


Cu acest cablu ENET veti putea diagnostica si coda multe optiuni suplimentare (exemplu Video in Motion) sau dezactiva optiuni deja existente (Exemplu Start Stop)

Functioneaza cu E-sys 3.27.1, ISTA-D si ISTA-P.

Compatibil cu TOATE tipurile de vehicule din seria F

BMW Seria 1 F20, F21
BMW Seria 2 F22
BMW Seria 3 F30,F31, F34, F35
BMW Seria 4 F32, F33
BMW Seria 5 F07, F10, F11, F18
BMW Seria 6 F06, F12, F13
BMW Seria 7 F01, F02, F03, F04
BMW X1 F48
BMW X3 F25
BMW X5 F15
BMW X6 F16


* Daca achizitionati acest produs , puteti opta si pt AutoData 2011 – 3.40 – 49 lei ; AutoData 2014 – 3.45 – 99 lei ; VIVIDWORKSHOP 2010 (lb. romana) 59 lei sau VIVIDWORKSHOP 2015 (lb. romana) 99 lei.


Product Features
 
One can hide modules or program single module
 
1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
3. Display engine output and torque meter ( purely fun, look engine output )
4. Cancel confirmation screen big screen boot delay
5. Open the voice recognition function
6. Three kind of bluetooth phone ringtones ( personality only )
7. Increasing the cic memory address to 50
8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
9. The digital speed display ( fun only )
10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
11. Indoor cycling memories of the last time the state when engine off
12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
13. Increasing shift paddles
14. The small screen to the large-screen display modify
15. Pdc display vertical and horizontal
16. Disable the seat belt status display - passenger seat
17. Disable the seat belt status display - driver seat
18. Disable seat belt reminder mistake ! The link is invalid. Device - passenger seat
19. Disable seat belt reminder - driving position
20. Disabled unfasten their seat belts voice prompts - passenger seat
21. Disabled unfasten their seat belts voice prompts - driving position
22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
23. Angel eyes open and cancel functions
24 turn off the engine start-stop function turned on by default
25 gps time synchronization
26 Foot open the back cover
27 Ds show s1-s7 selection
28 Active sports gearbox program sport +
29 Single microphone settings
30 Engine off automatically unlock
31 Internet applications
32 Armrest usb playback video
33 The maximum distance disable front camera view
34 The maximum distance to disable the rear camera view
35 Maximum speed disable front camera view
36 The maximum speed to disable the rear camera view

How to install E-sys & EDIABAS, EST token, paszdata for BMW F series coding

This is the instruction on how to install E-sys & EDIABAS, EST token, paszdata for BMW F series coding with  ENET (Ethernet to OBD) Interface 


---------------------------------------------------------------------------------------------------- 
INSTALL E-SYS & EDIABAS
------------------------- ---------------------------------------------------------------------------
01) Run "E-sys\E-Sys_Setup_3_22_5_b34057.exe" to install program to default location "C:\EC-Apps\ESG" (i.e. "C:\EC-Apps\ESG\E-Sys\")

 
02) During E-Sys installation, when prompted change the default Data Path from "C:\Data\" to "C:\ESysData\". 
 
03) Copy "EDIABAS" folder to the root of "C:\" (i.e. "C:\EDIABAS")
 
04) Run "C:\EDIABAS\Hardware\Ediabas-Konfigurator\Ediabas-Konfigurator.exe" and make sure "Interface:" is set to "INTERFACE=ENET".
 
(It should already be set, but check anyway - if you need to change it, use the drop-down list and select "INTERFACE=ENET" and then "Andern" and then "Ende".)

---------------------------------------------------------------------------------------------------- 
INSTALL E-SYS EST TOKEN (NOT INCLUDED)
----------------------------------------------- ----------------------------------------------------
- 05) Create subfolder "E-Sys EST" under "C:\ESysData\" (i.e. "C:\ESysData\E-Sys EST")

 
06) Copy EST Token File (e.g. "Code Away.EST") to "E-Sys EST" folder (i.e. "C:\ESysData\E-Sys EST\Code Away.EST")
 
*NOTE: E-SYS EST TOKEN IS NOT INCLUDED AND MUST BE OBTAINED SEPERATELY.

---------------------------------------------------------------------------------------------------- 
INSTALL PSdZData (NOT INCLUDED)
------------------------------------- ---------------------------------------------------------------
07) If existing "psdzdata" folder exists in "C:\ESysData\" (i.e. "C:\ESysData\psdzdata") delete it.
 
08) Copy downloaded "psdzdata" folder to "C:\ESysData\" (i.e. "C:\ESysData\psdzdata")
 
09) Make sure that there is a "Dist" folder in each of the Chassis folders (F01/F10/F20/F25/K001/RR01) etc. (e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_511\odx\dist")
 
(It should already be set, but check anyway - if not there - create empty "Dist" folders for each chassis folder)
 
*NOTE: E-SYS PSdZData IS NOT INCLUDED AND MUST BE OBTAINED SEPERATELY.
 


E-sys setup and copy TOKEN anywhere

You can copy the Token anywhere, but you have to go into For Bmw E-Sys settings and point to it. 
Here are the detailed instructions I wrote (Note Step 9):

01) Run "E-Sys_Setup.exe" to install program to "C:\EC-Apps\ESG\E-Sys\E-Sys.exe" (Install Password is "lo8F3lsVVg" if prompted) 

02) Copy "EDIABAS" folder to "C:\EDIABAS"

03) Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET
(should already be set, but check anyway)

04) Copy "e-sys est" folder to "C:\ESysData\e-sys est"

05) Copy all "psdzdata" subfolders (all 7 Folders) to "C:\ESysData \psdzdata\folders_1-7"

06) Make sure that there is a "Dist" folder in each of the Chassis (F01/F10/F25) folders etc.
(e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_5 11\odx\dist")
(should already be set, but check anyway - if not there - create empty "Dist" folders)

07) Turn Car's Auxillary Power On (Engine Off) and make connection to car with OBDII-Enet Interface Cable
(Wait a few minutes until the network adapter icon shows a Connection with the yellow exclamation point over it)

08) Launch "C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe" to verify cable and connection are working
(IP Address, MAC Address, & VIN will be displayed verifying actual communication to the car)
(ZGW_SEARCH.exe works intermittently on 64-Bit Windows - Not necessarily a problem if the ZGW_SEARCH window is blank,
so long as the computer's wired network adapter shows an IP Address assigned to the computer from the car) 

09) Run "C:\EC-Apps\ESG\E-Sys\E-Sys.exe" (It will take E-Sys a while to write the log file) and Under Options, Settings:
On the ODX Tab, set the ODX Rule Path to "C:\ESysData\Rules"
On the EST Tab, set the Developer-Soft-Token EST Path to "C:\ESysData\e-sys est\Code Away.est"
On the PROGRAM TAB, set the Directories - Data Path to C:\ESysData

10) Hit the Connect Button on E-Sys

Selcect Target Vehicle (e.g. TargetSelector:Project=F010-12-03-511m VehicleInfo=F010)

11) Select Connection via VIN, and click Connect
(Window should pop up confirming successful connection)
(The program will remember the "connection via VIN" for future connections)

12) After connecting to the car, each time you launch E-Sys, and Read / Code an ECU the first time, you will need the E-Sys PIN, which is 2690.
 
Package List:
 
1pc x For BMW ENET (Ethernet to OBD) Interface Cable

Pentru detalii suplimentare va rugam folositi formularul de contact.

0760.846.754; 0723.448.645; 0763.920.531; 0756.773.632 - Comenzi telefonice
Program de lucru: Luni-Vineri 09:00-17:30, Sambata 10:00-12.00

 


Detalii produs


Categorie: Bmw

Producator: Diagnozaobd2

Cod produs - SKU: BMW ENET 2016



Produse similare


Bmw
Interfata de diagnoza ISTA PRO K+CAN pentru BMW functioneaza la nivel de...
499 RON
629 RON
Bmw
Interfata tester diagnoza auto, BMW INPA - OBD2 ! Atentie: Aceasta...
169 RON
190 RON
Bmw
Interfata BMW K+CAN USB-OBD2 pentru BMW functioneaza cu INPA/Ediabas,...
135 RON
160 RON
Bmw
Aceasta interfata este Originala Carly, Generatia 2 cu adaptor Bluetooth...
399 RON
449 RON
Bmw
BMW C310 usor de utilizat , portabil , dedicat BMW Aparatul...
429 RON
499 RON
Bmw
Este ultima versiune! Suporta toate modelele BMW din 1997 - 2013 !!...
359 RON
399 RON
  
  
  

Categorii

  


  

Aboneaza-te la newsletter

 
Vrei sa afli prin email despre reduceri si promotii? Aboneaza-te acum la newsletter si fii la curent cu tot ce e nou!





  


  

Marturiile clientilor

 

Obdeleven super ușor de folosit, și un copil ar știi sa facă o diagnoza și o codare. Folosit pe un Passat 2012, sunt o grămadă de funcții de codare, am stat...

sc service la nea boby srl

Vezi mai multe marturii