Launch X431 Euro TAB III Diagnoza Profesional, Tester Auto Multimarca Profesional ORIGINAL Launch Europa, osciloscop inclus

Descriere

Euro Tab III este un noul dispozitiv de diagnosticare a vehiculelor de ultimă generație. Folosind sistemul de operare Android 9.0, Euro Tab III se bazează pe tehnologia de diagnosticare Launch foarte apreciată, oferind acoperire la nivel mondial pentru vehicule, diagnosticare puternică și numeroase funcții speciale. Nou pentru Euro Tab III este Smartlink® C VCI. Acest modul avansat permite comunicarea și funcțiile avansate în mai multe moduri. Dispunând de propriul ecran de 4,0 inchi, Smartlink® C comunică direct cu un vehicul pentru diagnosticare locală, de la distanță pentru diagnosticarea Launch SRD (Launch Super Remote Diagnosis), VCI este, de asemenea, compatibil cu DOIP (Diagnoza prin protocolul Internet), CAN FD , (rată de date flexibilă) și ca dispozitiv Pass-Thru care comunică prin protocoalele J2534, D-PDU și RP1210. Smartlink® VCI acceptă, de asemenea, diagnosticarea camionului folosind software-ul opțional HD pentru camion.

Euro Tab III include baza de date profesională Launch, complet integrată în software-ul de diagnosticare. Acest lucru vă va duce direct de la DTC la o rutină de testare pas cu pas, care duce la gasirea si identificarea codului de eroare.

Pretul afisat este valabil doar cu factura fiscala externa sau factura fiscala emisa de firma romaneasca neplatitoare de TVA.  Standard are 12 luni update online, pentru prelungirea update-ului ne puteti contacta direct sau platiti Launch prin aplicatia de pe tableta. Aveti optiunea de a alege la data comenzii sa beneficiati de varianta standard cu 1 an update online baza de date Launch si 1 an update online Haynes Pro sau optional contracost 2 ani update online baza de date Launch si 1 an update online Haynes Pro sau chiar 2 ani update online baza de date Launch si 2 ani update online Haynes Pro.

Pentru confirmarea comenzii ca si ferma este necesar un avans achitat de 30%. Pretul afisat in acest anunt este valabil emitand factura externa in EURO, tara membra UE care nu contine TVA sau emitand factura fiscala de pe firma din Romania care nu plateste TVA in Romania, in ambele situatii TVA-ul nu este deductibil.

X-431 EURO TAB III package is including:
X-431 EURO TAB II incl. Smartlink C 13 Inch tablet, PassThru O2-1 Scopebox, TSGUN + 4 RF Metal Sensors
Full systems diagnosis, 33 reset functions, tool box
1 year Car Software standard version
1 year Electronics Database standard version

The Euro Tab III is a newly-developed high-end vehicle diagnostic device. Using the Android 9.0 operating system, the Euro Tab III builds on the highly-regarded Launch diagnostic technology, offering worldwide vehicle coverage, powerful diagnostics and numerous special functions.

New for the Euro Tab III is the Smartlink® C VCI. This advanced module allows for communication and advanced functions in several ways.

Featuring its own 4.0-inch screen the Smartlink® C communicates directly with a vehicle for local diagnosis, remotely for Launch SRD diagnosis, (Launch Super Remote Diagnosis), the VCI is also compatible with DOIP (Diagnosis over the Internet protocol), CAN FD, (flexible data-rate), and as a Pass-Thru device communicating by J2534, D-PDU and RP1210 protocols. The Smartlink® VCI also supports Truck diagnostics using the optional HD truck software.

The Euro Tab III includes the Launch professional database, fully integrated into the diagnostic software. This will take you directly from the DTC to a step-by-step testing routine, leading to the fault code solution.

INCLUDED: Launch O2-1 four-channel oscilloscope.

Using the latest software, the Launch oscilloscope is very easy to master, automatic pre-sets for many automotive applications make set-up very straightforward. Pre-sets can be used in combination mode, testing several components at the same time.

INCLUDED: The Launch TSGUN and four TPMS sensors.

The TS Gun will read all sensor information, programme Launch sensors, and diagnose TPMS fault codes.

Euro Tab III Features

Special Functions & Resets

• ABS Bleeding

• AC System re-learn/Initialisation

• Adaptive front lighting

• Adblue reset

• Air/fuel reset

• Air level calibration

• Battery matching

• Brake reset

• Coolant bleed

• Crank sensor adaptive learning

• DPF regeneration

• EGR adaption

• Electric throttle relearn

• Engine power balance monitoring

• Gas particulate filter regeneration

• Gearbox relearn

• High voltage battery diagnostics

• Immo Prog

• Immobiliser reset

• Injector coding

• Intelligent cruise control

• Language change

• Motor angle calibration

• NOX sensor reset

• Oil maintenance reset

• Seat occupancy calibration

• Steering angle reset

• Start/stop reset

• Sunroof reset

• Tyre reset

• TPMS database reset

• Transport mode

• Window calibration

The Handset

The all-new Euro Tab III handset features a super-size 13.3-inch, 1920x1080 IPS display and 8GB of on-board memory.

Based on the Android 9 operating system the Euro Tab III has a newly-designed Launch APK for smooth and powerful operation. Supported by 256GB of storage and wireless connection to the VCI, the Euro Tab III can perform any high-speed task asked of it.

Connections include USB type C, USB Type A, and HDMI. The cameras are hi-resolution 8 mega pixel front and 13 mega pixel rear, both can be used to take pictures of defects which can be emailed direct to customers. The handset is waterproof and dustproof to IP65, the high-capacity battery uses the latest quick-charge technology.  

The tablet is protected by a high impact silicone rubber housing with corner reinforcements, a carry handle, palm brace and a dampened multi position rear stand.

Launch CarSet Database - Electronic edition, powered by HaynesPro

Launch guided diagnostic function is fully integrated into the Euro Tab III software. It will guide the user from DTC reading, to step by step testing and on to the solution. This work method will save time and increase efficiency

The database includes.

• Fuse and relay box locations and overview
• Wiring diagrams for engine management, ABS, ESP, SRS, A/C, doors, and windows etc.
• Component locations & information
• Fault codes (manufacturer and EOBD)
• Control unit locations
• Ground point locations
• Battery disconnect/reconnect procedures
• Highlight function to aid tracing wires and components
• High- voltage circuit deactivation

The Smartlink® C VCI

Included with the Eurotab III, the new Smartlink® C communication interface represents a huge advance in diagnostic capability.  

The Smartlink®C VCI attaches to the vehicle OBD port, connecting with the handset using fast Wi-Fi. In this mode it communicates using advanced protocols including DOIP, D-PDU, RP-1210 and CAN-FD.  

The Smartlink® C can be used as a J2534-compliant Pass-thru device, for reprogramming ECUs with software downloaded from OEM websites. The VCI is also compatible with both passenger car and truck software, (an optional purchase).

Lastly, the Smartlink® C supports Launch Super Remote Diagnosis (SRD). Using the Smartlink platform a service provider can remotely access the vehicle and carry out advanced diagnostics, recoding and programming of ECU’s using professional diagnostic tools including OEM.

SmartLink C VCi Functions:

• Local Diagnosis VCI
• Remote Diagnosis VCI (LAUNCH SRDs)
• Compatible with DoIP
• Pass-Thru VCI
• J2534
• D-PDU
• RP-1210
• Supports both passenger car and HD vehicles (HD Software optional)